Resin Bound Driveway Install Werrington

Project Info

  • Construction Date

    July 2017

  • Category

    Resin Surfacing

The Project

Our clients had a very old concrete drive, which although was still extremely solid, had seen better days and was looking quite tired and worn out.

Another issue our customers had with their driveway was the levels. There was a huge drop down from in front of the garage down to the house entrance.  They asked us to try and improve this by reducing the fall as well as asking us to widen the actual drive by around half a metre.

What we did

An area next to the driveway was excavated to increase the width. We then had to remove the loose stone from the centre of the drive and take some of the concrete out so we could get the right levels.

Once we had managed to get the right levels, excavated areas were stoned with MOT type 1 hardcore, whickered and edging blocks installed.

Concrete was then used where needed and once cured the entire driveway was primed and the Resin trowelled.

Our customers wanted Silver with a hint of black to match other parts of their house such as the doors.

The final result was a huge transformation that will last for years with zero maintenance, oh and no more huge drop to the front door from the garage.